Optimizing Adsorption of 17α-Ethinylestradiol from Water by Magnetic MXene Using Response Surface Methodology and Adsorption Kinetics, Isotherm, and Thermodynamics Studies.

Magnetic MXene composite Fe3O4@Ti3C2 was successfully prepared and employed as 17α-ethinylestradiol (EE2) adsorbent from water solution. The response surface methodology was employed to investigate the interactive effects of adsorption parameters (adsorption time, pH of the solution, initial concentration, and the adsorbent dose) and optimize these parameters for obtaining maximum adsorption efficiency of EE2. The significance of independent variables and their interactions were tested by the analysis of variance (ANOVA) and t-test statistics. Optimization of the process variables for maximum adsorption of EE2 by Fe3O4@Ti3C2 was performed using the quadratic model. The model predicted maximum adsorption of 97.08% under the optimum conditions of the independent variables (adsorption time 6.7 h, pH of the solution 6.4, initial EE2 concentration 0.98 mg L-1, and the adsorbent dose 88.9 mg L-1) was very close to the experimental value (95.34%). pH showed the highest level of significance with the percent contribution (63.86%) as compared to other factors. The interactive influences of pH and initial concentration on EE2 adsorption efficiency were significant (p < 0.05). The goodness of fit of the model was checked by the coefficient of determination (R2) between the experimental and predicted values of the response variable. The response surface methodology successfully reflects the impact of various factors and optimized the process variables for EE2 adsorption. The kinetic adsorption data for EE2 fitted well with a pseudo-second-order model, while the equilibrium data followed Langmuir isotherms. Thermodynamic analysis indicated that the adsorption was a spontaneous and endothermic process. Therefore, Fe3O4@Ti3C2 composite present the outstanding capacity to be employed in the remediation of EE2 contaminated wastewaters.

Enhanced adsorption of steroid estrogens by one-pot synthesized phenyl-modified mesoporous silica: Dependence on phenyl-organosilane precursors and pH condition.

In this study, the phenyl-modified mesoporous materials were successfully synthesized using phenyl-organosilanes (trimethoxyphenylsilane and triethoxyphenylsilanea) by one-pot co-condensation method for the removal of estrone (E1), 17ß-estradiol (E2), and 17α-ethinyl estradiol (EE2). Both the triethoxyphenylsilane-modified material (20%EtPh-MCM-41) and trimethoxyphenylsilane-modified material (20%MePh-MCM-41) could rapidly achieve equilibrium in 30 min at low adsorbent dosage of 0.025 g L-1. But the different hydrolysable groups of trimethoxyphenylsilane and triethoxyphenylsilane led to the discrepancies in physicochemical properties of the 20%EtPh-MCM-41 and 20%MePh-MCM-41, and thus affected adsorption performance. The 20%EtPh-MCM-41 exhibited the faster estrogen adsorption rates expressed in pseudo-second-order kinetic constant than the 20%MePh-MCM-41 due to the more hydrophobicity. Conversely, the 20%MePh-MCM-41 had much more estrogen adsorption capacities than the 20%EtPh-MCM-41 because of the more available adsorption sites. The addition of the phenyl-organosilane improved estrogen adsorption by π-π and hydrophobic interactions, and the Langmuir-model-based maximum adsorption amounts could reach 99.02, 83.47, and 53.60 mg g-1 for EE2, E2, and E1, respectively. But excessive concentration of phenyl-organosilane decreased adsorption capacities due to poor pore structure. Alkaline solution, which induced estrogen deprotonation and negative surface charge of absorbents, inhibited estrogen adsorption by electrostatic repulsion and the decreased hydrophobic interaction, but acidic and neutral solutions, ionic strength, and humic acid did not significantly affect estrogen removal. This work not only showed the high potential of trimethoxyphenylsilane-modified MCM-41 used in water purification for steroid estrogens, but also demonstrated the suitable selection of organosilane precursors was key in producing favorable materials with designed functionality.

Optimization of laccase-alginate-chitosan-based matrix toward 17 α-ethinylestradiol removal.

Laccase extract (LE) from Pycnoporus sanguineus was immobilized on calcium and copper alginate-chitosan beads and applied for the removal of 17α-ethinylestradiol (EE2). Effects of immobilization conditions such as: sodium alginate (SA) concentration; LE/SA ratio and chitosan/ion (Ca+2 or Cu+2) ratio on the immobilization yield were investigated. Immobilized LE on Ca-beads and Cu-beads was then used to degrade an EE2 solution. The optimal conditions for LE immobilization on Ca-beads were: 1.5% (w/v) SA, 1:5 (v/v) LE/SA and 3:7 (v/v) chitosan/ion (Ca+2). The optimal conditions for immobilization on Cu-beads were 2.0% (w/v) SA, 0.5:5 (v/v) LE/SA and 3:7 (v/v) chitosan/ion (Cu+2). The best result was obtained for immobilized LE on Ca-beads in buffer-absent medium. Furthermore, the immobilized enzyme was reused in five cycles for EE2 removal. The formation of EE2 dimers by LE treatment has been demonstrated by electrospray ionization coupled to time of flight mass spectrometer (ESI-TOF-MS). The results evidenced that immobilized LE in alginate-chitosan-divalent cation bead is an effective alternative for EE2 removal.

Determination of estrone and 17α-ethinylestradiol in digested sludge by ultrasonic liquid extraction and high-performance liquid chromatography with fluorescence detection.

Estrone, 17ß-estradiol and 17α-ethinylestradiol are increasingly recognised as important micropollutants to be monitored in wastewater treatment plants. These estrogens are retained onto sludge due to their high adsorption and since they are largely used in land applications, the monitoring of these chemicals in sludge samples is of great importance. This study describes a method for the determination of estrone and 17α-ethinylestradiol in fresh sludge samples. After spiking fresh digested sludge with estrone and 17α-ethinylestradiol and maintaining in contact during 5, 30 and 60 min, the freeze-dried samples were subjected to ultrasonic liquid extraction, with methanol and acetone, and analysed by high-performance liquid chromatography with fluorescence detection. The average recoveries obtained for estrone and 17α-ethinylestradiol using the different contact times were 103 ± 3 and 97 ± 4%, respectively. Fresh sludge samples from one waste water treatment plant located in Portugal were analysed and estrone was detected in primary fresh sludge, anaerobic digested sludge and dehydrated sludge at a concentration in the range of 1-4.8 µg/g. The method here developed does not require any sample clean-up, being fast and simple, reliable and inexpensive, making possible its application for monitoring the contamination of sludge with these estrogens.

N-propyl functionalized spherical mesoporous silica as a rapid and efficient adsorbent for steroid estrogen removal: Adsorption behaviour and effects of water chemistry.

To achieve an enhanced and selective adsorption of steroid estrogens, the n-propyl functionalization was applied to the mesoporous silica material (MCM-41) according to the physico-chemical property analysis of steroid estrogens. Adsorption behaviour and water chemistry effects were evaluated with the most concerned steroid estrogens: estrone (E1), 17ß-estradiol (E2) and 17α-ethinyl estradiol (EE2) based on the materials characterization. The results showed the uptakes of E1, E2, and EE2 onto the modified MCM-41 were enhanced and accelerated by the n-propyl functionalization, which was positively correlated with the hydrophobicity of the synthesized materials. Kinetic data fitted the pseudo-second-order model well. Based on the Langmuir model, the maximum adsorption capacities of the n-propyl modified MCM-41 were up to 119.87, 88.38, and 86.91 mg g-1 for EE2, E1, and E2, respectively. Importantly, both acid and neutral solutions were beneficial to estrogen removal, but ionic strength and humic acid did not affect the estrogen adsorption. The above results suggested that the n-propyl functionalized MCM-41 would be a promising adsorbent for the rapid and efficient removal of estrogens with the selectivity from natural organic matter like humic acid. Mechanism analysis showed the key role of hydrophobic interaction, and it also confirmed the contribution of the carbonylic lone pair electrons of E1, which helped the formation of stronger hydrogen bonds with silicon hydroxyls and enhanced the dipole-dipole interaction between E1 and the synthesized materials.

Analysis of 17α-ethinylestradiol and bisphenol A adsorption on anthracite surfaces by site energy distribution.

17α-Ethinylestradiol (EE2) and bisphenol A (BPA) are highly toxic and widely detected endocrine-disrupting compounds (EDCs) throughout the world in surface waters. Adsorption is an effective way to remove EE2 and BPA from water. However, it is difficult to clearly explain the mechanism of adsorption theoretically only through classic adsorption models. In order to insight into the adsorption of EE2 and BPA, site energy distribution (SED) theory was introduced to investigate the adsorption of EE2 and BPA on heterogeneous surfaces. EE2 and BPA were adsorbed on un-anthracite (unmodified anthracite) and 4K anthracite (4 mol L-1 KOH-modified anthracite) in single- and bi-component systems under various temperatures and pHs. The results suggested that EE2 and BPA molecules first occupied the high-energy adsorption sites and then spread to low-energy adsorption sites. There were more high-energy sites on 4K anthracite, resulting in a higher adsorption capability for EE2 and BPA. Besides, increasing temperature and acidic environment were conducive to the EE2 and BPA adsorption. SED analyses indicated that, in neutral solutions, π-π electron donor-acceptor (EDA) interaction might be the primary mechanism for BPA adsorption, while ligand exchange, hydrogen bonds, and π-π EDA interaction might simultaneously work in the adsorption of EE2. It was possible that EE2 molecule was near perpendicular to surface, while BPA molecule was parallel to surface, resulting in the higher adsorption capacities of EE2. However, compared with EE2, BPA had outstanding competitive advantages in bi-component system because of the stronger π-π EDA interaction between BPA and anthracite.

Characterization of potassium hydroxide modified anthracite particles and enhanced removal of 17α-ethinylestradiol and bisphenol A.

Anthracite is a natural inorganic-organic hybrid environmentally friendly material, which often is used as a filter medium in water treatment. In this study, we processed anthracite particles using potassium hydroxide (KOH) with different concentrations. The anthracites, before and after treatments, were characterized by Brunauer-Emmett-Teller analysis, scanning electron microscopy, Fourier transform infrared spectrometer, X-ray diffraction, X-ray photoelectron spectroscopy, and Boehm titration. The specific surface area and the amount of total alkalinity of anthracite were 23.73 m2 g-1 and 0.38 mmol g-1 (increased by 101 and 217%, respectively) for 4 M KOH treatments, but decreased to 10.09 m2 g-1 and 0.12 mmol g-1 for 10 M KOH treatments. We selected 4 M KOH-modified anthracite particles to remove 17α-ethinylestradiol (EE2) and bisphenol A (BPA) from water with unmodified anthracite used in control experiments. The pseudo-second-order model fitted well for the whole adsorption process, and intraparticle diffusion was not the unique rate-controlling step. The equilibrium adsorption data fitted well with the Langmuir-Freundlich model, and the adsorption capacities of EE2 and BPA on anthracite particles after 4 M KOH treatments were 0.7914 and 0.4327 mg g-1 (increased by 138 and 97%, respectively), because the active sites markedly increased. The ligand exchange, hydrogen bonds, and π-π electron donor-acceptor interactions were the main adsorption mechanisms. The 4 M KOH-modified anthracite could be promising in large-scale applications, both as filter medium and adsorbent for organic contaminants.

Degradation and intermediates of diclofenac as instructive example for decomposition of recalcitrant pharmaceuticals by hydroxyl radicals generated with pulsed corona plasma in water.

Seven recalcitrant pharmaceutical residues (diclofenac, 17α-ethinylestradiol, carbamazepine, ibuprofen, trimethoprim, diazepam, diatrizoate) were decomposed by pulsed corona plasma generated directly in water. The detailed degradation pathway was investigated for diclofenac and 21 intermediates could be identified in the degradation cascade. Hydroxyl radicals have been found primarily responsible for decomposition steps. By spin trap enhanced electron paramagnetic resonance spectroscopy (EPR), OH-adducts and superoxide anion radical adducts were detected and could be distinguished applying BMPO as a spin trap. The increase of concentrations of adducts follows qualitatively the increase of hydrogen peroxide concentrations. Hydrogen peroxide is eventually consumed in Fenton-like processes but the concentration is continuously increasing to about 2mM for a plasma treatment of 70min. Degradation of diclofenac is inversely following hydrogen peroxide concentrations. No qualitative differences between byproducts formed during plasma treatment or due to degradation via Fenton-induced processes were observed. Findings on degradation kinetics of diclofenac provide an instructive understanding of decomposition rates for recalcitrant pharmaceuticals with respect to their chemical structure. Accordingly, conclusions can be drawn for further development and a first risk assessment of the method which can also be applied towards other AOPs that rely on the generation of hydroxyl radicals.

Mitigating 17α-ethynylestradiol water contamination through binding and photosensitization by dissolved humic substances.

Photodegradation is an important abiotic pathway transforming organic pollutants in natural waters. Humic substances (HS), including humic and fulvic acids, are capable of accelerating the photodegradation of steroid estrogens. However, how the photodegradtion of the emerging pollutants influenced by HS is not clear. Thus, we studied the roles and mechanisms of HS in inducing the photodegradation of 17α-ethynylestradiol (EE2). HS generally induces EE2 photodegradation through binding and reactive species generation. Apart from hydroxyl radical (HO), the excited triplets of humic substances (3HS*) are other key reactive species degrading EE2 by abstracting electrons. HO and 3HS* were responsible for about 60% of the overall EE2 photodegradation at 250µmol HS L-1. Most of EE2 molecules bound to the HS via H-bonding, π-π and hydrophobic interactions. The binding role of HS in promoting EE2 photodegradation was rationalized by 17ß-estradiol competitive binding with EE2 to the humic and fulvic acids. Furthermore, HS-promoted photodegradation can alter EE2 toxicity to wheat, rice and Ormosia plants. This study extends our knowledge on the photochemical behaviors and ecological risks of steroid estrogens in natural waters.

Nanoparticles with photoinduced precipitation for the extraction of pollutants from water and soil.

Nanotechnology may offer fast and effective solutions for environmental clean-up. Herein, amphiphilic diblock copolymers are used to develop a platform of photosensitive core-shell nanoparticles. Irradiation with ultraviolet light removes the protective layer responsible for colloidal stability; as a result, the nanoparticles are rapidly and irreversibly converted to macroscopic aggregates. The associated phase separation allows measuring the partitioning of small molecules between the aqueous phase and nanoparticles; data suggests that interactions are enhanced by decreasing the particle size. Adsorption onto nanoparticles can be exploited to efficiently remove hydrophobic pollutants from water and contaminated soil. Preliminary in vivo experiments suggest that treatment with photocleavable nanoparticles can significantly reduce the teratogenicity of bisphenol A, triclosan and 17α-ethinyl estradiol without generating obviously toxic byproducts. Small-scale pilot experiments on wastewater, thermal printing paper and contaminated soil demonstrate the applicability of the approach.

Bioinspired production of magnetic laccase-biotitania particles for the removal of endocrine disrupting chemicals.

Microbial laccases are powerful enzymes capable of degrading lignin and other recalcitrant compounds including endocrine disrupting chemicals (EDCs). Efficient EDC removal on an industrial scale requires robust, stable, easy to handle and cost-effective immobilized biocatalysts. In this direction, magnetic biocatalysts are attractive due to their easy separation through an external magnetic field. Recently, a bioinspired immobilization technique that mimics the natural biomineralization reactions in diatoms has emerged as a fast and versatile tool for generating robust, cheap, and highly stable (nano) biocatalysts. In this work, bioinspired formation of a biotitania matrix is triggered on the surface of magnetic particles in the presence of laccase in order to produce laccase-biotitania (lac-bioTiO2 ) biocatalysts suitable for environmental applications using a novel, fast and versatile enzyme entrapment technique. Highly active lac-bioTiO2 particles have been produced and the effect of different parameters (enzyme loading, titania precursor concentration, pH, duration of the biotitania formation, and laccase adsorption steps) on the apparent activity yield of these biocatalysts were evaluated, the concentration of the titania precursor being the most influential. The lac-bioTiO2 particles were able to catalyze the removal of bisphenol A, 17α-ethinylestradiol and diclofenac in a mixture of six model EDCs and retained 90% of activity after five reaction cycles and 60% after 10 cycles.

Microextraction with polyethersulfone for bisphenol-A, alkylphenols and hormones determination in water samples by means of gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry analysis.

In the present work, the suitability of polyethersulfone (PES) tube was assessed for the simultaneous sorptive microextraction of commonly found endocrine disrupting compounds in natural waters such as bisphenol-A (BPA), nonylphenol technical mixture (NP mix), 4-tert-octylphenol (4tOP), 4-n-octylphenol (4-nOP), 17ß-estradiol (E2) and 17α-ethynilestradiol (EE2). After the concentration of target compounds in the PES polymer, the analytes were recovered soaking the polymer with a suitable solvent (ethyl acetate or methanol), derivatized using N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane (BSTFA+1% TMCS) and determined by gas chromatography-mass spectrometry (GC-MS). The analysis was also performed without derivatization step by means of liquid chromatography-tandem mass spectrometry (LC-MS/MS). Extraction parameters (addition of MeOH, ionic strength, extraction speed and time and desorption time) were evaluated and the optimum conditions were fixed as follows: 150 mL water samples containing a 10% (w/v) of sodium chloride and using 5 tubular PES sorbent fibers (1.5 cm length×0.7 mm o.d.). Equilibrium conditions were achieved after 9 h, with absolute extraction efficiencies ranging from 27 to 56%. On the whole, good apparent recoveries were achieved (68-103% and 81-122% for GC-MS and LC-MS/MS, respectively) using deuterated analogues as surrogates. Achieved quantification limits (LOQs) varied between 2-154 ng/L and 2-63 ng/L for all the compounds using GC-MS and LC-MS/MS, respectively. The effect of organic matter was evaluated previous to apply the final method to the analysis of estuarine and wastewater real samples. The comparison of both methods showed that overall, PES-LC-MS/MS provided shorter sample preparation time and better LODs, but PES-silylation-GC-MS allowed the simultaneous determination of all the studied compounds with adequate repeatability and accuracy.

Assessment of multiple hormonal activities in wastewater at different stages of treatment.

Changes in the endocrine potency of municipal wastewater at 3 wastewater treatment plants (WWTPs) in Australia were investigated using a panel of in vitro receptor-driven transactivation assays. The assays were based on human estrogen receptor α, androgen receptor, progesterone receptor, glucocorticoid receptor, and peroxisome proliferator-activated receptor γ2. Total removal efficiencies for estrogenic activity in the dissolved phase were 79.8% to 99.4%. Chemical analysis of 17ß-estradiol, estrone, and 17α-ethinylestradiol levels showed that they accounted for the majority of the observed in vitro estrogenic activity in the final effluents but only 18% to 70% of estrogenic activity in the influents. Removal efficiency for androgenic activity was 97.5% to 100%. Endocrine activity levels were low in the final effluent of the WWTP with the lowest catchment population, with only estrogenic activity detected. In the final effluent of the WWTP with an intermediate catchment population, estrogenic, glucocorticoid, and peroxisome proliferator activities were detected. Estrogenic, antiandrogenic, progestagenic, glucocorticoid, and peroxisome proliferator activities were detected in the final effluent of the WWTP with the highest catchment population. The present study confirms the efficacy of secondary and tertiary treatment in reducing the concentrations of endocrine-active compounds in municipal wastewater. Further work is required to determine the possible health risks to aquatic biota posed by multiple hormonal activities present at low levels.

A pilot scale comparison of advanced oxidation processes for estrogenic hormone removal from municipal wastewater effluent.

This study investigates the oxidation of selected endocrine disrupting compounds (estrone, 17ß-estradiol, estriol and 17α-ethinylestradiol) during ozonation and advanced oxidation of biologically treated municipal wastewater effluents in a pilot scale. Selected estrogenic substances were spiked in the treated wastewater at levels ranging from 1.65 to 3.59 µg · L(-1). All estrogens were removed by ozonation by more than 99% at ozone doses ≥1.8 mg · L(-1). At a dose of 4.4 · mg L(-1) ozonation reduced concentrations of estrone, 17ß-estradiol, estriol and 17α-ethinylestradiol by 99.8, 99.7, 99.9 and 99.7%, respectively. All tested advanced oxidation processes (AOPs) achieved high removal rates but they were slightly lower compared to ozonation. The lower removal rates for all tested advanced oxidation processes are caused by the presence of naturally occurring hydroxyl radical scavengers - carbonates and bicarbonates.

Evaluation of a molecularly imprinted polymer for determination of steroids in goat milk by matrix solid phase dispersion.

A molecularly imprinted polymer-matrix solid-phase dispersion methodology for simultaneous determination of five steroids in goat milk samples was proposed. Factors affecting the extraction recovery such as sample/dispersant ratio and washing and elution solvents were investigated. The molecularly imprinted polymer used as dispersant in the matrix solid-phase dispersion procedure showed high affinity to steroids, and the obtained extracts were sufficiently cleaned to be directly analyzed. Analytical separation was performed by micellar electrokinetic chromatography using a capillary electrophoresis system equipped with a diode array detector. A background electrolyte composed of borate buffer (25mM, pH 9.3), sodium dodecyl sulfate (10mM) and acetonitrile (20%) was used. The developed MIP-MSPD methodology was applied for direct determination of testosterone (T), estrone (E1), 17ß-estradiol (17ß-E2), 17α-ethinylestradiol (EE2) and progesterone (P) in different goat milk samples. Mean recoveries obtained ranged from 81% to 110%, with relative standard deviations (RSD)≤12%. The molecularly imprinted polymer-matrix solid-phase dispersion method is fast, selective, cost-effective and environment-friendly compared with other pretreatment methods used for extraction of steroids in milk.

[Removal of estrogens in laccase catalyzed oxidative processes].

The removal of 5 estrogens (bisphenol A, estradiol, ethinylestradiol, estrone and octylphenol) in laccase catalyzed oxidative processes was studied. The effects of pH and NOM on the removal of EDCs were discussed in detail, as well as the kinetics of EE2 removal and the reaction products. The results indicated that laccase was capable of removing estrogens efficiently. The optimal pH was between 4 and 6. NOM significantly inhibited the removal of estrogens at the initial stage of the reaction. However, the adverse effect of NOM was not obvious after 24 h treatment. The removal of EE2 obeyed the second-order kinetics. The activity of laccase remained stable during the reactions and the stability was higher than that of peroxidase. MS analysis demonstrated that the EE2 dimer formed through radical coupling mechanism was the main reaction product.

Biotransformation of 17α-ethynyl substituted steroidal drugs with microbial and plant cell cultures: a review.

Structural modification of steroids through whole-cell biocatalysis is an invaluable procedure for the production of active pharmaceutical ingredients (APIs) and key intermediates. Modifications could be carried out with regio- and stereospecificity at positions hardly available for chemical agents. Much attention has been focused recently on the biotransformation of 17α-ethynyl substituted steroidal drugs using fungi, bacteria and plant cell cultures in order to obtained novel biologically active compounds with diverse structure features. Present article includes studies on biotransformation on 17α-ethynyl substituted steroidal drugs using microorganisms and plant cell cultures. Various experimental and structural elucidation methods used in biotransformational processes are also highlighted.

Immunosensors for estradiol and ethinylestradiol based on new synthetic estrogen derivatives: application to wastewater analysis.

Novel electrochemical immunosensors for sensitive detection of 17-ß estradiol (E2) and ethinylestradiol (EE2) are described on the basis of the use of magnetic beads (MBs) as solid support and screen-printed electrodes as sensing platforms. Four synthetic estrogen derivatives containing either a carboxylic group or an amine group at the C-3 position were synthesized and covalently bound to MBs functionalized with amine or carboxyl groups, respectively. The assay was based on competition between the free and immobilized estrogen for the binding sites of the primary antibody, with subsequent revelation using alkaline phosphatase-labeled secondary antibody. Preliminary colorimetric tests were performed in order to validate the applicability of the synthetic estrogens to immuno-recognition and to optimize different experimental parameters. In a second step, electrochemical detection was carried out by square wave voltammetry (SWV). Under the optimized working conditions, the electrochemical immunosensors showed a highly sensitive response to E2 and EE2, with respective detection limits of 1 and 10 ng/L. Cross-reactivity evaluated against other hormones demonstrated an excellent selectivity. The developed devices were successfully applied to analysis of spiked and natural water samples. These new immunosensors offer the advantages of being highly sensitive, easy, and rapid to prepare, with a short assay time.

Removal of highly polar micropollutants from wastewater by powdered activated carbon.

Due to concerns about ecotoxicological effects of pharmaceuticals and other micropollutants released from wastewater treatment plants, activated carbon adsorption is one of the few processes to effectively reduce the concentrations of micropollutants in wastewater. Although aimed mainly at apolar compounds, polar compounds are also simultaneously removed to a certain extent, which has rarely been studied before. In this study, adsorption isotherm and batch kinetic data were collected with two powdered activated carbons (PACs) to assess the removal of the polar pharmaceuticals 5-fluorouracil (5-Fu) and cytarabine (CytR) from ultrapure water and wastewater treatment plant effluent. At pH 7.8, single-solute adsorption isotherm data for the weak acid 5-Fu and the weak base CytR showed that their adsorption capacities were about 1 order of magnitude lower than those of the less polar endocrine disrupting chemicals bisphenol A (BPA) and 17-α-ethinylestradiol (EE2). To remove 90 % of the adsorbate from a single-solute solution 14, 18, 70, and 87 mg L(-1) of HOK Super is required for EE2, BPA, CytR, and 5-Fu, respectively. Effects of solution pH, ionic strength, temperature, and effluent organic matter (EfOM) on 5-Fu and CytR adsorption were evaluated for one PAC. Among the studied factors, the presence of EfOM had the highest effect, due to a strong competition on 5-Fu and CytR adsorption. Adsorption isotherm and kinetic data and their modeling with a homogeneous surface diffusion model showed that removal percentage in the presence of EfOM was independent on the initial concentration of the ionizable compounds 5-Fu and CytR. These results are similar to neutral organic compounds in the presence of natural organic matter. Overall, results showed that PAC doses sufficient to remove >90 % of apolar adsorbates were able to remove no more than 50 % of the polar adsorbates 5-Fu and CytR and that the contact time is a critical parameter.